How much does a 3D printer cost per month in Utah?

About 72.2¢ a month, assuming 120 W at a 60% duty cycle, 6 hours a day, 150 days a year at 13.37¢/kWh.

How many kilowatt-hours does a 3D printer use?

Roughly 65 kWh a year under these assumptions, or 0.07 kWh for every hour it runs.

Is that expensive compared with other states?

Utah has the 3rd cheapest average residential rate in the country, so this appliance costs less here than the U.S. average of $11.88 a year.

Home › 3d printer › Utah

Cost to run a 3D printer in Utah (June 2026 rates)

At 13.37¢ per kilowatt-hour — Utah's average residential price in June 2026 — running a 3D printer costs $8.66 a year. That is 27% less than the national average of $11.88. Utah's residential rate is up 2.1% from June 2025, which moves this appliance from $8.49 to $8.66 a year.

Per hour: 1.0¢
Per day of use: 5.8¢
Per month: 72.2¢
Per year: $8.66

Assumption: 120 W at a 60% duty cycle, 6 hours a day, 150 days a year — 65 kWh a year. A consumer FDM printer mid-print. The heated bed dominates the draw, and an enclosure lowers the duty cycle by holding heat in. Use the calculator to swap in the numbers from your own model.

How Utah compares

Utah pays 13.37¢/kWh, the 3rd cheapest residential electricity of the 51 U.S. jurisdictions EIA reports. For this appliance that works out to $3.22 less a year than the typical U.S. household pays for the same use. Running the same 3D printer costs $8.50 a year in Nevada and $34.16 in Hawaii, so where you live changes this bill by $25.67 a year.

State	Rate	Per month	Per year
Nevada	13.11¢	70.8¢	$8.50
Nebraska	13.25¢	71.5¢	$8.59
Utah	13.37¢	72.2¢	$8.66
Louisiana	13.49¢	72.8¢	$8.74
Tennessee	14.07¢	76.0¢	$9.12

States ranked by average residential price, cheapest first. See all 51 states for a 3D printer.

What else costs about the same in Utah

Computer monitor$8.02 a year in UT Security camera$5.86 a year in UT Ceiling fan$11.55 a year in UT

Cutting the number down

The heated bed, not the hotend, is the load. Lowering bed temperature after the first layers cuts the average draw.
Long prints are cheap per hour but numerous: a week of continuous printing is a real line item.

Questions

How much does a 3D printer cost per month in Utah?: About 72.2¢ a month, assuming 120 W at a 60% duty cycle, 6 hours a day, 150 days a year at 13.37¢/kWh.
How many kilowatt-hours does a 3D printer use?: Roughly 65 kWh a year under these assumptions, or 0.07 kWh for every hour it runs.
Is that expensive compared with other states?: Utah has the 3rd cheapest average residential rate in the country, so this appliance costs less here than the U.S. average of $11.88 a year.